Tuesday, February 28, 2012

Segregation in Cast Products


References
Basu B, Singh A K 1997 Role and characterization of double-diffusive convection during
solidification of binary alloys. Proc. 3rd ISHMT–ASME Heat & Mass Transfer Conf. and 14th
Natl. Heat & Mass Conf., IIT, Kanpur, pp 129–141
Bergman M I, Fearn D R, Bloxham J, Shannon M C 1997 Convection and channel formation in
solidifying Pb–Sn alloys. Metall Mater. Trans. A28: 859–866
Choudhary S K, Ghosh A 1994 A study of morphology and macrosegregation in continuously cast
steel billets. Iron Steel Inst. Jap. Int. 34: 338–345
Choudhary S K, Mazumdar D 1995 Mathematical modelling of fluid flow, heat transfer and
solidification phenomena in continuous casting of steel. Steel Res. 66: 199–205
Flemings M C 1974 Solidification processing (New York: McGraw Hill)
Flemings M C 1990 Segregation in castings and alloys. Proc. Elliott Symp. (Iron & Steel Soc) pp
216–235
Flood S C, Hunt J D 1988 Columnar to equiaxed transition. Metals handbook 9th edn (Am. Soc.
Mater. Int.) vol. 15, pp 130–136
Fredriksson H, Olsson A 1986 Mechanism of transition from columnar to equiaxed zone in ingots.
Mater. Sci. Technol. 2: 508–516
Ghosh A 1990 Principles of secondary processing and casting of liquid steel (New Delhi: Oxford &
IBH) ch. 6,7 & 9
Ghosh A 1997 Fundamental aspects of segregation control in continuous casting of steel. Proc. Int.
Symp. on Quality Challenges in Continuous Casting (Ranchi: Indian Inst. Metals), pp 203–218
Goyal R K, Ghosh A 1992 Centreline segregation in continuously cast steel billets. Trans. Indian
Inst. Metals 45: 303–314
Gu J P, Beckermann C 1999 Simulation of convection and macrosegregation in a large steel ingot.
Metall. Mater. Trans. A30: 1357–1367
Lacaze J, Lesoult G 1999 Modelling and development of microsegregation during solidification of
an Al–Cu–Mg–Si alloy. Iron Steel Inst. Jap. Int. 39: 658–664
Li M, Mori T, Iwasaki H 1999 Effect of solute convection during macrosegregation in Pb–Sn binary
alloys during upward directional solidification. Iron Steel Inst. Jap. Int. 39: 33–38
Lipton J, Kurtz W, Heinemann W 1983 Concast Tech. News 22: 4
Miyazawa K, Schwerdtfeger K 1981 Macrosegregation in continuously cast steel slabs –
preliminary theoretical investigation on the effect of steady state bulging. Arch. Eisenw. 52:
415–422
Moore J J 1984 Review of axial segregation in continuously cast steel. Continuous casting (ed.) J J
Moore (Iron & Steel Soc.) vol. 3, pp 11–20
Ohnaka I 1988 Microsegregation and macrosegregation. Metals handbook 9th edn (Am. Soc. Mater.
Int.) vol. 15, pp 136–141
Prescott P J, Incropera F P 1996 Convection heat and mass transfer in alloy solidification. Adv. Heat
Transfer 28: 231–328
Radovik Z, Lalovic M, Tripkovic M, Branislav J 1999 Forming of positive macrosegregation during
steel ingot solidification. Iron Steel Inst. Jap. Int. 39: 329–334
Roy T K, Choudhary S K, Ghosh A 1992 Tool and alloy steels pp 365–372
Schneider M C, Beckermann C 1995 Simulation of micro-/microsegregation during solidification of
a low-alloy steel. Iron Steel Inst. Jap. Int. 35: 665–672
Singh A K, Basu B 1995 Mathematical modelling of macrosegregation of iron carbon binary alloy:
role of double diffusive convection. Metall Mater. Trans. B26: 1069–1081
Singh A K, Basu B 2000 On convection in mushy phase and its effect on macrosegregation. Metall.
Mater. Trans. A31: 1687–1692
Tsuchida Y et al 1984 Trans. Iron Steel Inst. Jap. 24: 899
Yamada H, Takenouchi T, Takahashi T, Funazaki M, Iwadate T, Nakada S. 1995 Influence of
alloying elements on the segregation of high purity CrMoV steel. Iron Steel Inst. Jap. Int. 35:
686–692

No comments: